Cosmetic hose manufacturers share the precautions for the use of cosmetic hoses. Now most cosmetics in life are hoses. The use of cosmetic hoses should carefully combine hoses and hose assemblies. Do not drag, kink or flatten on sharp or abrasive surfaces. The following cosmetic hose manufacturers tell you the precautions for the use of cosmetic hose:

　　1. Pressure

　　The pressure (including pulse pressure) charged into the hose product shall not exceed the specified planned working pressure.

　　2. Temperature

　　Hose products shall not be used at temperatures other than those specified or claimed by the hose manufacturer (including the temperature of delivery data and ambient temperature).

　　3. Conveying materials

　　It can only be used for a combination of hose and planning information. If you have any questions about its applicability, you can consult the hose manufacturer. When transporting potentially hazardous materials, such as toxic, corrosive, explosive and flammable materials, attention should be paid to minimize the impact of leakage. When not in use, it is required not to fill the hose and hose assembly with the information given.

　　4. Environment

　　Hoses and hose assemblies shall not be used outside the planned environment. If you have any questions about its applicability or need to use it under special or different conditions, consult the hose manufacturer.

　　5. Zigzag radius

　　The application of hose and hose assembly shall not be lower than the Z small zigzag radius specified or advocated by the hose manufacturer, otherwise the information transported will be limited. Twists or distortions near hose connections should be prevented, as continued twists and turns in these directions will aggravate hose fatigue damage and then lead to premature hose ring damage.

　　6. Change stress

　　Hoses and hose assemblies are generally not suitable for operation under distorted conditions.

　　7. Tensile stress

　　Hoses and hose assemblies can only be subjected to tensile stress under specially planned conditions. If you have any questions about the suitability of the hose, consult the hose manufacturer.