Production process of cosmetic hose: tube drawing - injection head - Printing - tail sealing. This is the basic process of hose production. However, there are differences in specifications and specific production processes. Here are two common production processes of cosmetic hose. After that, you can also learn about hose production equipment and production process.

　　1、 Production process of round tube cosmetic hose:

　　1.1 pipe drawing - draw out the hose body according to the customer's requirements and the corresponding pipe diameter and length.

　　1.2 note shoulder - note the corresponding shoulder according to the customer's cover configuration.

　　1.3.1 offset printing - 1-6 color silk screen printing, determine the bright and frosting effect according to the customer's requirements.

　　1.3.2 silk screen printing, bronzing and labeling - complete the silk screen printing, bronzing and labeling processes according to the requirements of the customer's design draft.

　　1.4 lock the cover or seal the tail: lock the cover or seal the tail according to the customer's requirements.

　　1.5 completion inspection - inspect product quality. Ensure 100% factory quality.

　　1.6 packaging - according to the customer's packaging requirements, the packaging leaves the factory.

　　二、椭圆化妆品软管生产流程：

　　2.1抽管——根据客户要求，相应管径和长度抽出软管管身。

　　2.2.1无肩胶印——1-6色丝印，根据客户的要求，确定亮光，磨砂效果。

　　2.2.2无肩丝印、烫金、贴标——根据客户设计稿需求，完成丝印，烫金，贴标工序。

　　2.3注肩——根据客户的配盖情况，注相应的肩部。

　　2.4锁盖或者封尾：根据客户要求，锁盖或者封尾。

　　2.5完检——检验产品质量。确保100%出厂质量。

　　2.6包装——根据客户的包装要求，包装出厂。